The most common way to protect your territory in a summer cottage is the euro fence.
Such popularity is due to the fact that this option is easy to install, and also has aesthetic features.
Thanks to a wide variety of forms, many design decisions can be taken.
In addition, the euro -bottoms are financially affordable, and also have good strength and durability.
But such durability directly depends on the correct installation of the elements of this fence, as well as the competent choice of the company that produces it.
Center; «>
What to remember when installing a fence
Today there are many manufacturers of such fences. It can be professional companies that specialize in this work, and also adhere to all the manufacturing standards of elements.
But it is not rarely engaged in such work in unsuitable conditions by non -professionals, not adhering to the technology at all, as well as saving on the composition of concrete and the number of reinforcement.
Therefore, in order for the fence to serve for a long time it is important to contact trusted companies that have a quality certificate. Perhaps it will be better to consult with the neighbors who installed such a fence several years ago, and find out which company they made an order.
Proper installation of the fence
Marking
Before installing the Eurobar, it is necessary to mark. To do this, at the extreme points it is necessary to fix the pegs, and pull the measured cord.
This marking will show the uniform location of the plane inside the territory. It is very important that the stretched cord does not touch the earth, vegetation, or some other elements. To do this, you can prepare the territory in advance.
Concrete sections of the fence
Next, you need to start installing concrete sections of the fence. Although there are many options and technologies for installing an euro collection, however, all of them have a common detail.
Then, the pillars should be engaged
First you need to reliably fix the support pillars of the fence with concreting. To install the pillars, it is necessary to make recesses that will have dimensions 30 × 30 cm, and a depth of 70 cm.
After that, a pillar is inserted into the recesses, the inner edge of which should come into contact with the marginal cord.
Then, using stones or bricks, a bite of each pillar is produced in a recess.
Retreat between the pillars directly depends on the size of the concrete tape plates. For the vertical of the pillars to be flat, it is important to use the building level.
Plates
Когда столбы установлены в специальные пазы сверху заводятся плиты. This process is not entirely convenient, therefore, at least four people are needed for this stage.
For this work, two ladders will also be required. After the slabs of all sections are installed in grooves, the final stage follows.
We fix it
At the end, it is important to fix each pillar using a solution. If you make fixation at once, then inconvenience in the installation of concrete slabs may occur, as they can be of different sizes. Pillars concrete solution are best used in a liquid consistency.
It is very important not to save on the order of special hats, which are mounted on pillars. This will not only give a beautiful view of the fence, but also provide additional strength for the fence, and also will not allow attackers to carry out the theft of concrete plates. Hats can be mounted using special construction glue.
Painting
A more beautiful type of euro -collection can be given using painting. Before painting, it is important to disagree with the concrete surface of the fence.
The composition of the paint should also have good resistance to external environmental factors. According to technology, it is better to paint after six months after installing the fence.
If you install an euro collection yourself, you can save a lot of money I do not hire expensive specialists. Moreover, this installation does not require special skills.