The modern construction market has long been impossible to imagine without foam products. This is modern material, widely used in the decoration of buildings facades. It is easy to manufacture, easy to install and is reliable in operation. Technologies are developing more and more rapidly every day, and the processing of foam was not the exception. One of the last directions that allow you to give the material almost any form, from small exact details to large layouts, has become a figured cutting.
Foam — the material is convenient for processing due to its structure. It is easily exposed to a knife or knife -off knife. But on an industrial scale, modern professional equipment is used for the manufacture of decorative elements of the architectural appearance of the facade and interior of the building.
The most effective is thermal cutting, or as it is called, curly cutting of foam from UTEPLENIE-FASADA. This method has been used for more than a dozen years. Previously, a thin metal wire was used to give a foam to a foam heated to a certain temperature.
Now these are equipment with automatic control, allowing polystyrene foam from blanks, with a certain density and size, to get a layout or finished product. After processing it needs to be polished, covered, if necessary, paint and protective composition.
To perform large volumes for the manufacture of decorative elements or when performing a non -standard order, large capacities are required. This can be allowed to do figure cutting. Products are made according to individual drawings of the customer, any shape and any size, unlike standard standard products of another type of processing.
The whole process consists of three main stages. The first is the development of an individual project or the selection from the catalog of existing products. The second is from the whole polystyrene block of the desired brand, but not lower than PSB-C 25F, thermal cutting of the object is performed. Third — grinding and painting using a bullet.
Application for the decoration of the facade of the foam product has proven themselves well. This is a material that is convenient to manufacture and practical in application, which will last you for more than a dozen years. Economic indicators are also very good, because polystyrene is cheaper than its analogues — concrete, fiber concrete, gypsum, glass -fiber concrete.