Repair of the parquet floor is more difficult than ordinary wooden, so it requires more patience and accuracy. Parquet made of insufficiently dried wood will dry out over time.
The same thing happens if it heats up for a long time. Since the dimensions of the riveting during drying are reduced, the cracks form, then the rivets come out of the hook and fly off. None of the quality glue and disorders of the styling technology also lead to exfoliation of the parquet from the base. Before repairing the parquet, you will have to choose rivets from the same wood.
You will need the following tools and materials: cycling, electric steam, carpentry glue, grinding machine or grinding skins of different grain. The falling rivet must be replaced only if it has significant damage. It is much easier to glue the fallen rivets to the same place. First, the rivet is thoroughly cleaned of dirt and dust, cleaned the back of its and the base on which it is laid. Put the riveting on the glue and carefully adjust.
After the glue dries, the protruding parts are treated with a shirt, and then the cycle. The final refinement of the surface is made with a skin. The gaps between rivets, if they are small, are cleaned of dirt, dust and filled with putty for wood. Now the prepared floor can be completely sanded. Having finished grinding, parquet is covered with varnish. This is usually done at least three times, allowing the previous layer to dry well. After all the work is completed, a do -it -yourself parquet floor in the apartment will be your pride for many years. Do not forget to rub it with mastic and remember that the parquet is afraid of moisture.