The final stage of the installation of windows is the decoration of window slopes. The sloping device, in addition to the protective function, also carries a decorative component — correctly performed slopes give the windows a finished aesthetic look.
Slopes do no earlier than 24 hours after the installation of the windows themselves. This is due to the property of the mounting foam to expand and harden in this period of time. Slopes are prefabricated and plaster.
The slopes from the side of the street are plastered with a cement mortar, then they are put down twice. For plastering internal slopes, mixtures are used with the addition of lime or gypsum. Purely gypsum solutions are undesirable, since the windows can be aloof, and gypsum does not tolerate moisture.
According to the technology, the plastering of slopes begin from the upper part using the hung rule. It is fixed either with nails or gypsum test. Then move to the lateral surfaces, aligning the solution with a wide spatula. The next stage is the application of the primer, and then the covers and grouts.
If plastic window blocks are installed, then a layer of silicone sealant is required between the frame and the slope. To wooden windows, plastering slopes can be adjacent closely.
Installation of slopes from sheet materials (for example, drywall) can start at least from the upper edge, even from the sides, the priority is not of fundamental importance. Such slopes are more expensive than plaster due to the cost of materials, but more simple in installation. The fastening of sheet materials can be carried out both on self -tapping screws and using glue or profiles system. After the installation ends, such slopes must be either glued or painted.
Recently, a taxi began to use more often. I always carry out a taxi call from one company. They completely suit me, come quickly, good cars, polite drivers who always have a change. By the way, the prices of this taxi are very coherent, not high. I completely trust them, they will not let you down.