First we need to determine the place where our office will be located to refer to the needs. When you have decided on the place, you can start preparing this place to install the toilet. To begin with, we need at the place where our toilet will be located to dig a hole in dimensions: a width meter, length meter and depth 3-4 meters, as much as you can! By the way, NSV-14 nipple compounds at competitive prices can be bought from a metalworking enterprise «Zeros».
Next, we need to make the toilet itself for this we need to prepare the material that we will need. What do we need when building a toilet: boards, nails, slate (or some other material for example corrugated board.). Next, we begin to make the walls of our toilet. When the walls are ready to fasten to the floor, you need to make a hole in the floor (at your discretion what!) Next, we make the roof, the roof must be done a little under the slope. When our toilet is ready, you can start installing. We need at the place where our hole is located under the toilet, install wooden timber, the beams need to be installed as reliably as possible, since they will serve as carrying our toilet (if you do not want to fail). We fasten our load -bearing bars, beams and we need to dig these dashes a bit, or overlap with bricks or stone (which will be strengthened. Next, you can install our toilet on the pit. That’s all our toilet is ready, successful construction.