If you decide to independently install an automatic watering system, then this article will benefit you. Of course, there is the easiest option that consists in addressing professionals. However, there are many people who prefer to do everything with their own hands. If you are one of them, then first of all, you need to decide on the right season for the installation of an auto polyve.
When is it better to install an automatic watering system?
It is best to do it in the warm season. If you reflect, then in reality, in winter or autumn, as well as in early spring, it is much more difficult to do such work. If the soil freezes, then digging trenches will be problematic. In addition, we must not forget that after the completion of all work, it is necessary to configure the system of auto -polywave correctly and start it. If a minus temperature is marked on the street, then this is contraindicated. In any case, a small amount of water will remain in the pipes, which will damage the equipment.
Sometimes owners of personal plots order installation in companies after a spring thaw. This approach is quite justified. The installed system of auto -polywave can be used until the fall. You, as the owner of such a system, will have enough time to understand whether it works correctly.
You can carry out work in July, as well as at the beginning of autumn. In any case, you should finish all the stages before the onset of cold weather. That is, by this moment you must have time to check and configure the system. For the winter, the operation of the watering car system is suspended.
At what stage is it better to mount auto police?
It is advisable to carry out installation before you deal with laying the lawn. However, at the same time, your landscape should be formed by the time the work starts, that is, this refers to the layout of the site.
If you reckon with other landscape objects during the design of the automatic irrigation system, then you will be able to avoid most of the possible destruction. The interaction of this system with the rest of the objects in the territory should not be paid attention. For example, it is necessary to leave mortgage cartridges under the tracks. Due to this, the pipe laying process will be noticeably lightweight. Be sure to select an area for accumulative capacity. The wiring should be brought to the installation site of the controller.
In any case, you should not start installing a caroli system before you finish landscape work. Remember that sprinklers will be damaged during soil laying. You should not rush with the installation of systems also because you cannot accurately find out the soil height in the future, so it is not yet possible to adjust the extensions of retractable sprayers.
Installation of auto -watering systems
Let’s try to figure out what subtleties you should know in order to install such a system correctly. To an inexperienced person, often they may not even occur. Topographic difficulties, for example, are important. Agree that the perfectly flat surface is far from every site. That is why the middle area of the lawn is located higher than its lower part. If you plan to use rotary sprayers, then on such a landscape you will have to face difficulties. This is due to the inability to capture low -located points using a powerful directional jet. The water will actually drain into the lowland after it accumulates quite a lot.
Better put fan spray in the amount of several pieces. They will be indispensable in those areas that rotary can not reach. For the most inaccessible places, static sprinklers are suitable. They are also quite effective in relation to narrow strips of lawn. For those areas that are located near the flower beds, fan sprinklers will come in handy. If you try to use rotary sprayers here, then your flowers will receive significant harm.
Static sprinklers, as well as rotors, can be used jointly to equip a unified caroli system. The only thing you need to remember is the importance of their location. They should be on different lines. If they are located the same, it is unlikely that your system will work normally.
Correct check valve installation
Another important point in terms of preventing the reverse flow of dirty water into the water supply — gradually the check valve can break, as a result of which the pump is damaged.
If you want the check valve to serve you as long as possible, pay enough attention to its installation. It is necessary to monitor its vertical location. Horizontal location is unacceptable. In fact, horizontal orientation will contribute to the creation of an elastic band, due to this element will wear out faster. At the same time, the valve must not be allowed to be dry for a long period. In this case, sealing gum can dry out, which is also an unfavorable. For this reason, the device also ceases to cope with its own functions. Most often, the problem of drying valves occurs in the cold season, because it is during this period that watering systems are not used. Try placing a check valve in a separate container with water. Due to this, you can increase the duration of the service of this part.
Measure all indicators carefully!
If you want to increase the accuracy of work, mark the territory before direct pipe laying. It is advisable to do this even before digging trenches. Due to this, the most gross errors may be excluded, which are most difficult to fix.
Experienced masters use wooden pegs and twine. Thus, they recreate the sequence of the location of the pipes, which was indicated in the project. You can use flags to designate areas where sprinklers will stand.
Follow the direction of sprinklers
They should not be directed to the walls, but at the plants! It may seem that this is not such a significant drawback. However, if the water will fall on the walls of the house for a long time, in the future you will have to face certain difficulties. In particular, a spot formed by salts present in water will appear on the surface. This very spot will be difficult to remove, while the appearance of the building will spoil it.
Of course, the regular flow of water under the pressure on the wall of the house threatens it with gradual destruction. Avoiding this problem is actually very simple, it is enough to follow the correct configuration of sprinklers from the very beginning.