Entrance doors require constant care. Frequent paints, putty and other similar actions are a rather tedious process that can be simplified to a significant extent using doors with the help of dermantine. This will make it possible to save on repair in the future, as well as make the appearance of the doors much more attractive.
Dermantine, in addition to good aesthetic characteristics, is also able to retain heat in the house, as well as improve the sound insulation characteristics of the door. DIY DIY upholstery upholstery will make it possible to provide several important properties for doors at once in one fell swoop. Dermantine can be used on wooden and metal doors. Almost everyone is able to make such a door upholstery with their own hands.
Dermantine will come in handy of materials for these purposes, but with a dermantine with your own hands, as well as construction and decorative furniture nails, fed or upholstery. In the case of the necessary materials, as well as tools, for example, a hammer, scissors, screwdrivers, you can start direct work.
First you need to remove the door from the loops, and also place it on a flat surface. For lining the front door, as a rule, it is located on four chairs or stools. After that, it is necessary to remove the loops, pens, locks, eyes and other accessories from the door. After all this procedure, an exceptionally clean door leaf should remain.
Before the start of the doors upholstery using dermantine, it is necessary to prepare a special casing to first. It is necessary to cut a special canvas from the starting material, which should be, at least ten centimeters longer, as well as wider than the door itself. After that, three strips are cut out, the width of which should be 14 cm. The length of the strip should correspond to the length of the door, and the other two are width.
These stripes must be beaten from three sides to the door, in addition to the place where the loops are fastened. The strips must be nailed downward. After that, make three rollers from Vatin or foam. They need to be put in strips and wrap, and also nail to the door. For the final upholstery of the doors, you need to evenly spread the canvas and carefully nail it.