At the moment, the installation of MDF panels is becoming an increasingly popular procedure, because the panels are quite a high -quality, reliable, relatively inexpensive, as well as a clean product from an ecological point of view. The installation of such panels does not take a lot of time, and thanks to a huge variety of samples, there are many options with a spectacular and effective decoration of almost any room that becomes even more comfortable. The lack of the need to align the walls for installing such panels also plays a very important role in the popularity of this material. The installation of MDF panels also does not require a variety of complex tools, special skills and knowledge.
MDF panels are installed to the guides, which must be attached in advance to the walls in the room. The guide strips must be placed clearly parallel to the ceiling and floor, if vertical installation occurs, as well as perpendicular if horizontal installation is carried out. In these works, the most important tool will be a plumb line, as well as the level. Before installing profiles, it is advisable to carry out wall processing using a special fire -fighting as well as an anti -inflade solution. During the location of the profile frame, it is necessary to take into account the height of the panels. It is advisable to leave the distance between the strips, which will be half a meter. Before starting installation work, it is necessary with the help of roulette, level, as well as a pencil to mark the future arrangement of profiles on the wall. The easiest way to fasten profiles is to fasten with nails and dowels, but other methods can also be used.
After the installation of all the guides is completed, it is necessary to proceed to the direct installation process. It is necessary to start fastening the rowing panel to the corner. It is very important at the same time to carry out attentive adjustment of its level, because it will be laid for all subsequent elements. Profiles must be attached to each other with brackets. After installing MDF panels, it is necessary to give a complete view to the array, which turned out, for which a variety of decorative strips can be used, as well as corners.