Lighting plays an important role in arranging the interior. You can add light source using an outstretched LED tape with LEDs located at the same distance from each other, the design is ideal for installation in combination with stretch and suspended ceilings.
LED tape for lighting stretch and suspended ceiling: Technical characteristics
The tape is made by winding it on rolls, a meter of 5 meters, standard indicators in width — up to 10mm, in thickness — up to 3 mm.
LED backlight will decorate any sauna, winter garden, halls, halls, living rooms. With a patterned stretch ceiling, the tape will add luxury of the dressing room, bathroom. LEDs consist of small crystals capable of increasing the luminous flux together, change the color of lighting.
It is on the number of diodes that the level of light flow will depend. To create the desired palette, you can choose a color glow, or plain blue, red, green, white, yellow shades. The color temperature of the glow can vary, starting from 2500k, and ending with 7500 K.
The source of the current for the tapes is the power supply and the voltage of 12V, or 24V.
Controlled backlight from LEDs
Today this direction is considered fashionable when choosing a room design. Management is possible both a tape of the same color and a diode ribbon combining a whole palette of shades. The power is important in the backlight. The power of the tape and the controller should be at the same level, in other cases, an additional power amplifier will be required. You can regulate the controller using a remote control, which also includes in the kit for the LED tape.
New models are equipped with a touch display, a multi -channel control system up to 10 channels. Such an innovation makes it possible to control lighting immediately in 2-3 rooms, and each controller can set your own program, give and set the necessary signal frequency for each.
LED backlighting pluses and minuses
Advantages:
It is easy to install: usually its reverse side is processed with tape, you can attach the structure to almost any surface;
The backlight is inexpensive at a price: it is the ribbons that have high light flow indicators, are considered the cheapest light source;
LEDs are reliable in comparison with the usual or lumiccent light bulb and will last much longer;
Unlike spot lighting sources, you can increase light indicators in LEDs in unlimited quantities;
When installing the LED, you can not be afraid of their overheating: the flow of light is evenly distributed along the entire length of the tape;
The backlight is universal, makes it possible to implement the most daring and unusual decisions of the designer.
The LED tape has one drawback: the old reinforcement with it is incompatible.
How to make a light backlight with an LED ribbon
Tapes are installed using an aluminum profile, this is the best solution when creating lighting in local areas. The tape is attached to adhesive tape, you can use a special glue — the dispute. Thanks to the profiles, the light flow is regulated, which is important to emphasize the racks, shelves, windows in stores, supermarkets. Also, the profile has a second advantage, it does not miss moisture and dust, when installing tapes for example, on the verandas, facades of buildings, that is, on the street. The length of the tape is 1 — 2 meters, components go to it to diversify the lamps, give them a more complex shape. Using this illumination, lighting can be given almost any configuration.
So that the light dissipates throughout the room, and dust and moisture did not sit on the LEDs, separately you can purchase pipe from polycarbonate. Increase, reduce the light flow due to a special screen, which is also attached in the kit or sold separately. The screen can be transparent, the glow with it is maximum with a fall power of not more than 5% and matte, effective for constant glow, but the fall power is higher — 30%.
On sale today you can choose any components in color and texture, while creating lighting for every taste, give the room a new, busy look. By inserting the LED tape into the skirting board, you can achieve the desired design in the room, make it bright, cozy, comfortable. Thanks to a variety of color palette, the glow is quite possible for any color to match the wallpaper, furniture in the room. This solution is often used in dark rooms, when ordinary lighting is not enough, the benefit that the choice of LED tapes allows you to do this. Knowing the entire process of mounting the tape into dumbbells, it is quite possible to insert yourself, enjoy comfort and comfort at any time of the day.